Iniezione PoE passiva a 12-porto 1U montata su rack con coppie di alimentazione: 4.5 (polo positivo) / 7.8 (p negativo)

Chiacchierare Contattici

Iniezione PoE passiva a 12-porto 1U montata su rack con coppie di alimentazione: 4.5 (polo positivo) / 7.8 (p negativo)

Altri video

September 17, 2025

Connessione Categoria: Adattatore dell'iniettore di PoE

Chiacchierare Contattici

Questo modulo Power over Ethernet consente di alimentare in remoto fino a 12 dispositivi tramite cablaggio Ethernet fino a 100 metri di distanza.Usa questo dispositivo per iniettare energia nel CAT-5, cavo CAT-6 o CAT-7. Ethernet standard utilizza 2 delle 4 coppie, POE passivo utilizza pin inutilizzati 4/5 per potenza aggiuntiva e 7/8 per terra.I punti di accesso WiFi utilizzano questo metodo per centralizzare la fonte di alimentazione.

Tag:

#Iniettore IEEE802.3af di PoE di gigabit #adattatore 48v di poe

Brief: Discover the 12-Port 1U Rack Mount Passive PoE Injector, designed for medium-to-large-scale network deployments. This high-density injector delivers remote power to up to 12 devices via Ethernet, with a transmission distance of 100 meters. Perfect for data centers, it features a 1U rack-mount design, plug-and-play operation, and compatibility with CAT-5/6/7 cables.

Related Product Features:

12-port passive PoE injector for powering up to 12 devices simultaneously.
1U rack-mount design, ideal for data centers and network cabinets.
Supports power delivery up to 100 meters via Ethernet cables.
Compatible with CAT-5, CAT-6, and CAT-7 cables for versatile use.
Plug-and-play operation with no software configuration required.
Isolated power output to prevent signal disruption or cascading failures.
Widely compatible with IP cameras, WiFi access points, and other PoE devices.
Cost-effective solution to upgrade non-PoE switches or routers.

Domande frequenti:

What is the maximum transmission distance for the 12-Port PoE Injector?

The 12-Port PoE Injector supports power delivery up to 100 meters (328 ft) via Ethernet cables.
Is this PoE injector compatible with IEEE 802.3af/at standards?

No, this is a passive PoE injector and does not comply with IEEE 802.3af/at standards. It uses pins 4/5 for positive power and 7/8 for ground.
What types of devices can be powered by this PoE injector?

This injector is ideal for powering IP cameras, WiFi access points, IP videophones, and other passive PoE-enabled devices.

Video correlati